Insurance for your business
- Auto repair shops
- Bars
- Carpenters
- Electricians
- Fast food
- Home-health agencies
- Painters
- Physician offices
- Restaurants
- Roofers
- Trucking companies
Learn
Compare two coverages
Business insurance for carpenters in Georgia
Published 2026-06-11 · by Brokly
Covers finish, cabinet, and trim carpentry contractors — framing, general carpentry, and new-dwelling construction are rated separately and aren’t in these figures.
What insurance do Georgia carpentry contractors need?
Each requirement and definition below cites its statute, regulator, or public reference — full sources at the end of this section.
You're required to have
Covers your carpenters' on-the-job injuries — and construction carve-ins start the mandate at one employee in some states.
Required once you regularly employ 3 or more employees, counting both part-time and full-time workers.
Pays medical care and lost wages when an employee is hurt working. Cabinet and trim installation is treated as construction work in states with construction-industry carve-ins, which apply a lower employee threshold — Missouri's rule names carpenters outright, and Florida reaches one-employee crews. Finish carpentry is hands-on power-tool work — table-saw, router, and nail-gun injuries make employee injury the trade's first insured risk.
Typically covers
- Medical bills for a work injury, at rates the state sets
- Part of the injured employee's lost wages
- The employer too: covered employees generally can't sue over the injury
Typically doesn’t
- Injuries outside work
- Independent contractors, in most states
- Lawsuits that get around the can't-sue trade-off — that's the employer's liability part of the same policy
Source: Georgia State Board of Workers' Compensation — Employer Information
Required in specific situations
Liability and property-damage protection for the vans and trucks that carry crews, casework, and trim stock to job sites.
Georgia requires motor vehicle liability insurance with minimum limits of $25,000 for bodily injury per person, $50,000 for bodily injury per incident, and $25,000 for property damage per incident.
Required if the business puts owned or leased vehicles on public roads — nearly every state requires auto-liability coverage to operate them.
Commercial auto insurance includes liability and property-damage protection for cars, trucks, and vans used for business — for a finish-carpentry contractor, the vans that carry crews, cabinets, trim stock, and tools to customer job sites. Installation work happens at the customer's site — crews, casework, and material move to a different premises every day.
Typically covers
- Liability when a business vehicle injures someone or damages property
- Accidents in vehicles titled to the business, driven by employees for work
- The liability minimums states set for business vehicles
Typically doesn’t
- Your liability when employees drive their own cars for work — that's hired and non-owned auto; the employee's own car stays on their personal policy
- The freight or goods being hauled — that's cargo or inland marine coverage
- Damage to your own vehicle, unless physical damage coverage is added
Source: Georgia Office of the Commissioner of Insurance and Safety Fire — Auto (Insurance Resources)
A licensing financial guarantee — not insurance for the business — some states require on file before issuing the license.
Required if your state's (or city's) licensing law conditions the carpentry or contractor license on filing a surety bond — the license won't issue or renew without it.
A contractor license bond is a financial-guarantee instrument the contractor buys from a surety and files with the licensing authority; it protects the public, not the contractor. Where a state conditions the carpentry or contractor license on one, it must be on file before the license will issue or renew — which states require one, and in what amounts, is set state by state by the licensing law. Where the licensing board demands it, the bond is a gate on the license itself — a contractor in a bond state cannot legally operate without one on file.
Typically covers
- Customers or the state, if you break the licensing board's rules
- The licensing requirement itself — where a board demands a bond, no bond often means no license
Typically doesn’t
- You — the surety collects any payout back from you
- Injuries or property damage from your work — that's general liability
- Big-job performance disputes — a performance bond is its own instrument
Definition source: California Contractors State License Board — C-6 Cabinet, Millwork and Finish Carpentry classification
Worth a look for this trade
Third-party injury and property damage — at the job site during the install, and after close-out when installed work fails.
Protects the business against claims of bodily injury, property damage, and personal injury — the customer's floor or countertop a crew damages mid-install is the working-hours half. Its products/completed-operations section pays for damage that occurs away from your premises and is caused by your completed work — the defining finish-carpentry exposure, since installed cabinetry, trim, and stairs stay in the customer's building long after the job closes. A finish carpenter's biggest exposure survives the job: a cabinet run, stair rail, or trim install that fails later is a claim that arrives after the crew has left.
Typically covers
- Injuries to customers, visitors, and other third parties
- Damage your operations cause to someone else's property
- Legal defense for covered claims
Typically doesn’t
- Your employees' injuries — that's workers' compensation
- Mistakes in professional advice or design — that's professional liability
- Redoing your own faulty workmanship itself
Definition source: Texas Department of Insurance — Commercial general liability insurance
Inland-marine coverage for the table saws, routers, and nail guns that live in the van and on job sites.
Inland marine insures movable business property — contractor equipment and property in transit — wherever the work is. For a finish carpenter that means the table saws, miter saws, routers, and nail guns riding in the van and set up on customer job sites rather than at a fixed premises. The trade's capital is its tools, and they ride in the van between job sites — inland marine is the property line built to follow them.
Typically covers
- Tools and equipment that travel — in trucks, on job sites, between locations
- Theft from a vehicle or job site, a common loss
- Rented or borrowed gear, when it's listed on the policy
Typically doesn’t
- Gradual wear and breakdown
- Tools that stay at your shop — that's commercial property
- The vehicles themselves
Definition source: Texas Department of Insurance — Commercial property insurance guide (inland marine)
Exact terms live in the policy — these are the typical boundaries.
What does it all cost?
A typical <5-employee carpentry shop in Georgia runs modeled $3.2k–$13k/yr in workers’ comp. More benchmarks are on the way to this chart.
bar height = modeled annual cost · tap a bar for that size’s range
Modeled from the $7.12/$100 payroll filed rate (2024) and each band's own observed payroll (CBP 2023). Illustrative — not a quote.
| Size band | Workers’ comp, modeled $/yr |
|---|---|
| <5 employees | ≈$5k |
| 5–9 employees | ≈$25k |
| 10–19 employees | ≈$51k |
| 20–49 employees | ≈$120k |
| 50–99 employees | ≈$400k |
How Georgia ranks + full workers’-comp detail →
Benchmarks in progress: Commercial auto · Contractor license bond · General liability · Tools & equipment
Sources & notes
Illustrative benchmark — not a quote or coverage recommendation. What a carpentry shop actually needs depends on its operations, contracts, and carrier.
- Georgia State Board of Workers' Compensation — Employer Information — as of Page-stated revision date: Rev. (7/15)
- Missouri Division of Workers' Compensation — construction-industry employer FAQ
- Florida Statutes § 440.02 (2024) — Florida Senate — as of 2024 statutes
- NAIC — Small Business Insurance
- Georgia Office of the Commissioner of Insurance and Safety Fire — Auto (Insurance Resources)
- NAIC — Auto Insurance topic — as of 2025-09-26
- Texas Department of Insurance — Commercial property insurance guide
- California Contractors State License Board — C-6 Cabinet, Millwork and Finish Carpentry classification
- California Contractors State License Board — Bond Requirements
- Texas Department of Insurance — Commercial general liability insurance
- NAIC — Glossary of Insurance Terms (inland marine)
- Oregon DCBS workers' compensation premium rate ranking study, June 2025 (calendar-year 2024 rates) — as of calendar year 2024
- US Census County Business Patterns 2023, state file (Finish carpentry contractors (NAICS 238350)) — as of 2023
Sources retrieved 2026-06-04 – 2026-06-11.
Stay informed
We’ll notify you when we’re ready to benchmark every coverage on this page.
No spam — one email.